You need a reliable way to track current congestion conditions for the Port of Antwerp and wire that signal into your systems. By the end of this post you will query Antwerp (BEANR), parse the response, and correctly interpret the lagged IMF PortWatch signal (7‑day average versus a 90‑day baseline) without mistaking it for live AIS wait times.
What this dataset is (and is not) for Antwerp (BEANR)
FreightPulse’s Antwerp congestion view is derived from IMF PortWatch. It is a lagged indicator, typically around 6–7 days behind the calendar, because PortWatch republishes its daily series in weekly batches. Always read the as_of date to know the effective observation date you’re using.
The signal is activity, not live vessel wait time. Specifically, it’s the recent 7‑day average port-call volume compared to a 90‑day baseline at the same port. Low activity can coincide with disruptions (e.g., closures) or simply fewer calls; it does not measure time-at-anchor or queue length from AIS. The congestion field is a deprecated alias of activity and should be treated as the categorical summary of that 7‑day-vs‑90‑day comparison, not a wait-time estimate.
Endpoint, authentication, and request limits
Use an X-API-Key header. If you do not pass a key, you’re a guest and limited to 100 requests per day per IP. Responses are wrapped in an envelope like {"success":true,"data":{...}} so check the success flag before reading data.
Endpoint for Antwerp (BEANR):
- Method: GET
- URL: https://freightpulsehq.com/api/v1/port-congestion?port=BEANR
- Header: X-API-Key: YOUR_API_KEY
This endpoint returns IMF PortWatch–based activity for Antwerp with a lag. There are no live AIS wait times or fares in this API. Do not treat any value as a same‑day rate or live operational queue.
Quickstart: run curl for Antwerp
Copy and run this request. Replace YOUR_API_KEY with your key, or omit the header to use the guest tier.
Live FreightPulse congestion for BEANR.
Source: live
cURL:
curl -H "X-API-Key: YOUR_API_KEY" "https://freightpulsehq.com/api/v1/port-congestion?port=BEANR"
JSON:
{
"success": true,
"data": {
"results": [
{
"port": "Antwerp",
"locode": "BE ANR",
"country": "Belgium",
"activity": "moderate",
"congestion": "moderate",
"as_of": "2026-11-13",
"metrics": {
"recent_avg_portcalls_per_day": 57,
"baseline_avg_portcalls_per_day": 53.7,
"ratio_vs_baseline": 1.06
}
}
],
"global_summary": {
"ports_high_activity": 0,
"ports_moderate_activity": 1,
"ports_low_activity": 0,
"ports_high_congestion": 0,
"ports_moderate": 1,
"ports_low": 0
},
"meta": {
"source": "IMF PortWatch (portwatch.imf.org) - UN Global Platform AIS data",
"data_lag_days": "4-11 (PortWatch republishes the daily series once a week; check as_of)",
"methodology": "activity is port-call volume, not congestion: last 7 days' avg calls vs a 90-day baseline for the same port. low means fewer calls than usual, which can be a closure or ships waiting offshore. It does not measure vessel wait or anchorage time. congestion is a deprecated alias of activity."
}
},
"meta": {
"request_id": "e7285065-96cc-49c9-b621-cf699dd0e7ed"
}
}
Field highlights you will actually use:
- data.results[0].as_of: ISO date for the observation; check this to understand the lag window you’re analyzing.
- data.results[0].activity and data.results[0].congestion: categorical summary (e.g., moderate). congestion is an alias of activity.
- data.results[0].metrics.ratio_vs_baseline: numeric multiplier of recent average port calls over the 90‑day baseline (e.g., 1.06 = 6% above baseline).
- data.results[0].metrics.recent_avg_portcalls_per_day and baseline_avg_portcalls_per_day: the underlying volumes used to compute the ratio.
- data.meta.source and data.meta.data_lag_days: provenance and a reminder that the series is republished weekly; always anchor logic to as_of.
Reading Antwerp’s signal correctly
Antwerp’s congestion value here reflects relative activity, not the number of vessels queued or an average time at berth. If the ratio_vs_baseline is greater than 1.0, recent port-call activity is above the 90‑day average; below 1.0 indicates below‑baseline activity. The categorical activity/congestion string (e.g., moderate) is a discretized view of that same relationship.
Use the as_of date to align with your operational window. Because PortWatch republishes once a week, the effective lag you observe in as_of typically lands around 6–7 days but can vary. Build your cache invalidation and ETL to expect weekly ticks, not hourly updates.
Python example: fetch BEANR and extract fields
This snippet calls the same Antwerp endpoint, checks the envelope, and prints the as_of date, the categorical activity alias (congestion), and the ratio against the 90‑day baseline.
import os
import requests
API_KEY = os.getenv("FREIGHTPULSE_API_KEY", "YOUR_API_KEY")
URL = "https://freightpulsehq.com/api/v1/port-congestion?port=BEANR"
headers = {
"X-API-Key": API_KEY
}
resp = requests.get(URL, headers=headers, timeout=20)
resp.raise_for_status()
payload = resp.json()
if not payload.get("success"):
raise RuntimeError("API returned success=false")
data = payload.get("data", {})
results = data.get("results", [])
if not results:
raise RuntimeError("No results for BEANR")
item = results[0]
as_of = item.get("as_of")
congestion = item.get("congestion") # alias of activity
metrics = item.get("metrics", {})
ratio = metrics.get("ratio_vs_baseline")
print(f"Antwerp (BEANR) as_of={as_of} congestion={congestion} ratio_vs_baseline={ratio}")
Operational guidance: lag, caching, and comparisons
Cadence and lag: The upstream PortWatch series is updated weekly. Expect the Antwerp as_of date to trail the current date by roughly 6–7 days on average. The data_lag_days metadata can vary; always treat as_of as the single source of truth for timing.
Caching: Because weekly updates are typical, caching Antwerp’s response for 24–48 hours is reasonable for dashboards and alerts. Reconcile your cache after you detect a change in as_of. Avoid minute‑by‑minute refreshes; they won’t surface new values faster than the upstream feed.
Units and interpretation: Volumes are in port calls per day. ratio_vs_baseline is unitless. activity/congestion is categorical and derived from the ratio and underlying comparison window (7‑day recent vs 90‑day baseline).
Guest limits: Without an API key, requests are capped at 100 per day per IP. Exceeding this will result in rate limiting, so use an API key for production integrations and cache sensibly.
Common integration patterns for Antwerp
- Alerting: If metrics.ratio_vs_baseline crosses a threshold (for example, materially below 1.0 or materially above 1.0), trigger a notice. Tie all alerts to as_of so recipients understand they are reacting to a lagged reading.
- Planning overlays: Combine Antwerp’s activity score with your own booking or gate-throughput data. The comparison is meaningful on the same as_of date, not the wall clock.
- Backfills: Because the series is not intraday, simply re-pulling the endpoint after a weekly refresh will update the last several days in one step. Store historical responses keyed by as_of for auditability.
- UX copy: Label the chart axis with “as_of” and annotate “IMF PortWatch 7‑day avg vs 90‑day baseline; lagged ~1 week; not vessel wait time.” This reduces misinterpretation.
Troubleshooting and guardrails
Empty results: If data.results is empty, retry later with backoff. This can happen near the upstream refresh window. Log the request_id under meta for support traces.
Field evolution: congestion is a deprecated alias of activity. Prefer activity long-term in your model, but you can safely read either today for Antwerp. Check for presence before indexing keys and default to None or NaN to avoid crashes.
Comparability: Do not compare Antwerp’s ratio directly to a different signal type such as live AIS wait times; this dataset does not measure anchorage or berth delay. If you blend with other sources, normalize definitions and ensure users see method notes.
End-to-end checklist for Antwerp (BEANR)
- Call the endpoint with X-API-Key or within the guest quota.
- Verify success is true and that results contains at least one entry.
- Read as_of, activity or congestion, and metrics.ratio_vs_baseline.
- Store recent_avg_portcalls_per_day and baseline_avg_portcalls_per_day for audit.
- Cache responses and refresh on as_of change; expect weekly updates and a ~6–7 day lag.
- Do not present values as live AIS wait times or same‑day freight rates.
FAQ
Is this live congestion for Antwerp?
No. It’s a lagged activity metric from IMF PortWatch: a 7‑day average of port calls versus a 90‑day baseline. It is not live AIS queue length or wait time.
How often does Antwerp data update?
Weekly, when PortWatch republishes the daily series. The observed lag is usually about 6–7 days. Use the as_of field to anchor your analyses.
Which fields should I display to users?
as_of for timing, activity or congestion for the categorical label, and metrics.ratio_vs_baseline for the numeric comparison. Include a short note that it’s 7‑day avg vs 90‑day baseline and is not a wait-time metric.
What are the guest limits if I don’t have an API key?
Guests are limited to 100 requests per day per IP. For production use, pass X-API-Key with YOUR_API_KEY and implement caching.
Can I rely on congestion long-term?
congestion is a deprecated alias of activity. Read activity as the canonical field and keep a backwards-compatible mapping if you already use congestion.
Get started in minutes: create your API key and build an Antwerp (BEANR) congestion widget using the curl and Python snippets above. Register for an account, then review the Documentation for production rollout details.